Abstract:
As automotive, aerospace, and industrial networks evolve toward zonal architectures, hybrid networking between deterministic time-sensitive networking (TSN) and traditional Ethernet domains is becoming increasingly prevalent. TSN domains typically rely on static configurations to guarantee deterministic communication, whereas traditional Ethernet networks use spanning tree protocols (STP) to dynamically maintain loop-free topologies. When redundant links between TSN and Ethernet domains trigger STP topology reconstruction following link failures or recoveries, the TSN domain cannot directly participate in the dynamic topology computation of the Ethernet domain. Consequently, redundant links cannot be effectively identified and pruned, potentially resulting in logical loops and Layer 2 broadcast storms, thereby affecting time synchronization and the deterministic transmission of time-sensitive flows. To address this issue, LiteSTP, a lightweight TSN spanning-tree protocol for TSN-Ethernet hybrid networks, is proposed. LiteSTP abstracts the TSN domain as a single logical switch that proxies STP messages, thereby eliminating the need to deploy a complete STP protocol stack in the TSN data plane. When the TSN domain is deployed at the boundary of the hybrid network, LiteSTP exploits the static configurability of TSN to enforce leaf-node constraints. It further introduces a Real2Virtual topology mapping mechanism and a deterministic root-port reselection algorithm to enable rapid topology adaptation after link failures and recoveries. Experimental results on a physical testbed demonstrate that LiteSTP effectively suppresses broadcast storms caused by cross-domain redundant links without requiring STP deployment in the TSN data plane, while maintaining time synchronization accuracy and stable transmission of time-sensitive flows. In link failure and recovery scenarios, LiteSTP reduces the service interruption delays caused by spanning tree reconstruction by 8.3% and 9.2%, respectively.